Reloading Brass

Reloading Brass

Powder Valley is your Reloading Superstore. We are the largest provider of all brands of reloading brass because we offer great service and wholesale prices. Brands include Hornady, Lapua, Nosler, Prvi Partizan, Remington, Starline and Winchester. Whether you are reloading for handgun, rifle, shotshell or muzzleloading we have what you need. We pack powder and primers together in one box for one hazmat fee. Whether you're looking for one box or bulk brass we have you covered. We carry all of your reloading needs including Smokeless Powder, Primers, Bullets and Reloading Equipment. You have found your one stop shop for all of your reloading needs. Fast Service - Dependable - Price Leader Whether you need handgun, rifle, shotshell or muzzleloaders we have the reloading brass you need. If you need loaded ammo, we can pack powder and primers together in one box for one hazmat fee. We offer fast service, great prices and we'll be your dependable source for reloading brass for years to come.

Frequently Asked Questions

1. What's the difference between new and once-fired brass?

New brass has never been fired and arrives with consistent, factory-fresh dimensions. Once-fired brass has been through one firing, usually from factory ammunition, and typically needs resizing, trimming, and a primer pocket check before reloading. Once-fired brass costs less but takes more prep work up front.

2. How many times can the same case be reloaded?

It depends on the cartridge, pressure, and care. As a general range, straight-wall pistol brass often lasts 10 or more loadings, moderate-pressure bolt rifle brass 5 to 10, and hot magnum loads sometimes only 3 to 5. Brass work-hardens each cycle, so inspect every case; verifying your brass is safe is always the reloader's responsibility.

3. What are the warning signs that a case should be retired?

Retire a case if you see any of these warning signs:

  • A bright ring near the case head, a sign of case head separation risk
  • Cracks at the case mouth or neck
  • A primer pocket loose enough that primers no longer seat snugly
  • Unusual force needed to chamber or extract the case

4. Does brass need to match the same headstamp within a batch?

It's not required, but many reloaders sort brass by headstamp for more consistent case volume and neck tension, especially for precision loads. Mixed-headstamp brass will generally still function safely if it's the correct cartridge and each case is inspected, but sorting tends to improve accuracy.

5. What is case trimming, and when does brass need it?

Brass stretches slightly with each firing, and trimming brings it back to the correct length so it doesn't exceed the cartridge's maximum. An overlong case can pinch in the chamber or crimp incorrectly. Reloading manuals list a trim-to length for each cartridge; check it with a case length gauge or calipers.