RCBS Small Base DIE SET .223 REM

SKU: RCBS11103


4 In stock

SKU: RCBS11103 Categories: , , Tag:


These two die-sets are intended for reloading bottleneck cases, and consist of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. This die sizes the outside of the case, de-primes, and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated

Standard 7/8″-14 ThreadProprietary Die SteelSet includes Full-Length Sizing die and Bullet Seating DieSizing die brings cases to SAAMI minimum cartridge dimensionsShips in Green Die Box

WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Additional information

Weight 1.16 lbs
Dimensions 6 × 5 × 2 in


There are no reviews yet.

Be the first to review “RCBS Small Base DIE SET .223 REM”

Your email address will not be published. Required fields are marked *